Izdelki za nastavitev - a (4)

A drum-type speed regulator made of medical polyethylene is used for more precise speed regulation, it has two scales: 0 to 250 ml/h for solutions with low viscosity (0.9% NaCL, 5% glucose and others); 0 to 200 ml/h for high viscosity solutions (20% glucose); 10. elastic adapter between the tube and the injection needle for additional introduction of the drug; Shelf life 3 years from the date of manufacture, as indicated on the packaging; Sterile, non-pyrogenic and non-toxic; Individual packaging. Instructions for use: 1. open the individual package, close the flow regulators, remove the protective cap from the needle, insert the needle into the cap of the infusion solution bottle; 2. Wait until the infusion solution fills 2/3 of the volume of the drip reservoir. 3; 3. open the flow regulators and release the air from the flexible pipe, the system is now ready for use; 4. Adjust the required infusion rate as needed; 5. The rotary knob has 2 adjustment sca

Purpose: for administering infusion solutions and blood substitutes with a flow regulator. The infusion system with an extremely precise drum-type flow regulator allows precise regulation of the flow rate and infusion of solutions into the patient's circulatory system with an adjustable (defined) infusion rate. Technical specifications: 1. The length of the pipe must not be less than 1500 mm; the diameter must not be less than 3.5 mm; 2. it is made of polyvinyl chloride; 3. The air duct, consisting of a metal needle and an air filter, is made of metal and polypropylene; 4. Filter to prevent the penetration of unwanted particles; 5. Drip chamber with filter provides visually controlled filling; 6. Connection type: Luer Slip or Luer Lock; 7. A metal atraumatic injection needle with a triangular blade, coated with silicone for ease of insertion, with a size of at least 0.8*38 mm (available with and witout a needle . There is a roller regulator for the flow rate.

For intravenous infusion of infusion solutions Specifications: 1. The tube is made of polyvinyl chloride; 2. a triangularly sharpened atraumatic needle of medical-grade steel with silicon coating for easy insertion; 3.The air duct consists of a metal needle and a polypropylene air valve. There are systems with a plastic needle (plastic needle from polypropylene for a bottle with infusion solution is combined with an air valve with a filter); 4.Drip chamber with filter to prevent the entry of unwanted particles, provides visually controlled filling; 5.Roller speed regulator; 6. an elastic adapter between the tube and the injection needle for additional drug administration; 7.Tube-to-needle connection type: Luer Lock; 8.Sterile, apirogenic, non-toxic; 9.For single use; 10.Packaging options: 25/500 11.Shelf life 3 years from the date of manufacture indicated on the package.

Disposable systems are used for transfusion of blood, infusion solutions and blood substitutes. Range includes systems with metal or plastic needle with integrated air line and filter. Specifications: - The tube is polyvinyl chloride; The atraumatic three-wall needle is made of austenitic medical steel; - The air duct consists of a metal needle and an air valve made of polypropylene. The range includes systems with plastic needles (polypropylene plastic needle for a bottle with infusion solution, connected to the air duct and filter); - The dropper is transparent and semi-rigid, allowing quick and visually controlled filling; - Filter to prevent the ingress of unwanted particles; - Filter complies with European standard to prevent foreign particles from entering the bloodstream; - Roller flow regulator; Elastic adapter between the tube and the injection needle; - Type of connection Luer Lock; Sterile, apirogenic, non-toxic; - Disposable; Individual package;